Mikä on uudelleenliukeneva polymeerijauhe? Kattava opas

Redispersible Polymer Powder (RDP) is a free-flowing white powder produced by spray-drying a polymer emulsion (typically VAE — vinyl acetate-ethylene copolymer) with protective colloids and additives. When mixed with water, RDP redisperses into a polymer emulsion that improves adhesion, flexibility, crack resistance, and water repellency in cement-based and gypsum-based building materials.

TENESSY manufactures five RDP grades — RDP-5580, RDP-5575, RDP-5560, RDP-5518ja RDP-5516 — each engineered for specific construction mortar applications.

How RDP Is Made

The production of redispersible polymer powder involves several key steps:

1. Emulsion polymerization: Vinyl acetate and ethylene monomers are polymerized in water with emulsifiers and initiators to create a stable polymer emulsion (latex)

1. Addition of protective colloids: Polyvinyl alcohol (PVA) or other protective colloids are added to stabilize the emulsion and enable redispersion

1. Spray drying: The liquid emulsion is sprayed into a hot-air chamber, evaporating the water and leaving dry polymer powder particles

1. Addition of anti-caking agents: Fine mineral powders (such as silica or calcium carbonate) are added to prevent the powder from clumping during storage

1. Sieving and packaging: The finished powder is sieved to uniform particle size and packaged in moisture-resistant bags

TENESSY RDP Technical Specifications

TENESSY RDP Grade Guide

TENESSY offers five RDP grades, each designed for specific application requirements:

Grade selection guidance:

• Osoitteessa anti-crack and plastering mortar → RDP-5580

• Osoitteessa tile adhesive and general bonding mortar → RDP-5560 or RDP-5516

• Osoitteessa repair mortar, sealant, and self-leveling → RDP-5518 (the most versatile grade)

• Osoitteessa wall putty powder → RDP-5560, RDP-5518, or RDP-5516

How RDP Works in Mortar

When RDP is added to a dry-mix mortar formulation and mixed with water on-site, two critical processes occur:

Elokuvan muodostuminen

The polymer particles in RDP coalesce into a continuous, flexible polymer film throughout the mortar matrix. This film interweaves with the cement hydrate structure, creating a polymer-modified composite with enhanced properties:

• Improved adhesion: The polymer film bonds to both the substrate and the cement matrix, dramatically increasing bond strength

• Lisääntynyt joustavuus: The flexible polymer phase allows the mortar to accommodate minor substrate movement and thermal expansion without cracking

• Reduced brittleness: Polymer modification converts brittle cement mortar into a more resilient, impact-resistant material

Water Retention and Workability

RDP, like cellulose ether, contributes to water retention in the fresh mortar. This ensures proper cement hydration and extends open time — the period during which tiles can be adjusted after placement.

Key Properties RDP Improves in Mortar

RDP Dosage Guide by Application

Note: Dosage is expressed as percentage of total dry mix weight. Over-dosage (>10%) can reduce compressive strength and increase cost without proportional benefit.

RDP vs Cellulose Ether: Complementary, Not Competing

A common question is whether RDP replaces cellulose ether in mortar formulations. The answer is no — they serve different but complementary functions:

Best practice: Use both RDP and cellulose ether together. RDP provides adhesion and flexibility; cellulose ether provides water retention and thickening. A typical tile adhesive formulation contains 0.3–0.5% HPMC (such as TENESSY NH200PC) + 1–3% RDP (such as RDP-5560).

RDP in Tile Adhesive: Why It’s Essential

Tile adhesive is the largest application for RDP. Modern tile adhesives must meet stringent standards (EN 12004, ISO 13007) that require:

• High bond strength under both dry and wet conditions

• Flexibility to accommodate thermal expansion and substrate movement

• Long open time for large-area tile installation

• Non-slip (anti-sag) properties for wall tile installation

RDP is the additive that makes these properties achievable. Without RDP, cement-based tile adhesive would be brittle, poorly bonded, and unsuitable for demanding applications like exterior tiling, large-format porcelain, and swimming pool surrounds.

Recommended TENESSY grades for tile adhesive: RDP-5560 and RDP-5516 for standard tile adhesive; RDP-5518 for premium tile adhesive requiring repair and self-leveling capabilities.

Quality Considerations When Choosing RDP

Storage and Handling

RDP is hygroscopic (absorbs moisture from air) and must be stored properly:

• Store in original sealed bags in dry, cool, well-ventilated conditions

• Protect from rain during transportation

• Avoid temperatures above 30°C

• Use opened bags as soon as possible; reseal to avoid moisture

• Stack on pallets, not directly on floor

• Shelf life: 12 months from production date (unopened)